User guide to assemble Flatpack Traditional Kandil

Find 4 identical pieces inside the envelop.

Fold all the pieces on the creasing lines. Ensure Collar flaps are at the top & bottom of Kandil.

Stick / Staple the slip-flaps to join all the pieces to each other.

Put the wire through the hole of the MDF plate & fix a bulb holder & a LED bulb (preferably warm white) with the holder.

Insert the MDF plates from top & bottom to get a sturdy structure.

Make sure that it doesn’t touch any of the paper surfaces from inside.

Stick the strips on the lower surface to get a complete look of the kandil.

Hang it in your balcony/ terrace/ outside the front door and let the Diwali celebration begin!

• In case you prefer any other colour paper instead of the given white paper, please change it at Step 1.
• To make the Kandil reusable, use stapling pins instead of sticking tape.
• For more sturdiness; strength, it is advised to stick the MDF plates to the Collar flaps from inside once the complete assembly is done.

• Paper Surfaces - 4 nos.
• Paper Strips - 16 nos.
• MDF Plates - 2 nos.
Lamp Material: Handmade Paper Dimensions (when assembled) Approx. 14” (L) x 14” (W) x 29-30” (H)